Differences

This shows you the differences between two versions of the page.

--- faq.gibbs [2019/12/13 08:10] – created yutaka
+++ faq.gibbs [2019/12/14 00:07] – yutaka
@@ Line 5: / Line 5: @@
 To save the "solutions" i.e. the point estimates of location parameters, you need one or two options in the parameter file.
 The required options depend on the program you are using.
+Note that
-==== GIBBS2F90/GIBBS3F90 ====
+==== GIBBS2F90/GIBBS3F90/THRGIBBS1F90 ====
 You need either of the following options.
+The solutions will be stored in ''final_solutions''.
-   * ''OPTION solution all'' if you want to save all the solutions.
+   * If you want to save all the solutions:
-   * ''OPTION solution [effects..]'' if you want to save the solutions of specific effects. For example, you save the effect numbers 1, 3, and 4, use ''OPTION solution 1 3 4''.
+      * ''OPTION solution all''
+   * If you want to save the solutions of specific effects.:
+      * ''OPTION solution [effects..]''
+      * For example, you save the effect numbers 1, 3, and 4, use ''OPTION solution 1 3 4''.
 If you do not need to estimate variance components and just need the solutions with the fixed variances in the parameter file, you need either of the following options (they have the same effect as ''OPTION solution'', so you do not need it).
+The solutions will be stored in ''final_solutions''.
-   * ''OPTION fixed_var all'' if you want to save all the solutions.
+   * If you want to save all the solutions:
-   * ''OPTION fixed_var [effects..]'' if you want to save the solutions of specific effects. The usage is the same as ''OPTION solution''; see above for details.
+      * ''OPTION fixed_var all''
+   * If you want to save the solutions of specific effects:
+      * ''OPTION fixed_var [effects..]''
+      * The usage is the same as ''OPTION solution''; see above for details.
+==== GIBBSF90TEST ====
+This program is still under development and testing.
+The behavior will change version by version.